Polyester conveyor belt

Polyester conveyor belt, also known as EP conveyor belt, has a tensile body made of canvas interwoven with warp polyester and weft nylon. Its performance characteristics include low elongation in the warp direction and excellent grooving performance in the weft direction, good water resistance, no decrease in wet strength, no mold growth, high initial modulus of polyester, and a lower safety factor. It is suitable for conveying materials under medium to long distance, high load, and high-speed conditions.

Specification and technical parameters of polyester multi-layer fabric core conveyor belt

Fabric Type Fabric Construction Fabric
Model adhesive tape
Thickness (mm/P) Strength series (N/mm) Cover adhesive thickness (mm) Width
range
Mm strip length
Two layers of longitude and latitude, three layers, four layers, five layers, and six layers are covered with adhesive on top and adhesive on bottom
Polyester polyester nylon EP-80 0.80 160 240 320 400 480 2.0-8 0~4.5 400~500 ≤ 300
EP-100 0.80 200 300 400 500 600
EP-125 0.85 250 375 500 625 750
EP-150 0.90 300 450 600 750 900
EP-160 0.90 320 480 640 800 960 500~2500
EP-200 1.05 400 600 800 1000 1200
EP-250 1.25 500 750 1000 1250 1500
EP-300 1.35 600 900 1200 1500 1800
EP-350 1.50-1050 1400 1750 2100 600-2500
EP-400 1.80-1600 2000 2400 600-2500
EP-500 2.00-2000 2500 3000

Coverage level

tensile strength
≥

Elongation at break
≥

Wear amount
≤

Changes in tensile strength and elongation at break after aging

Mpa

Kgf/cm2

%

Mm3

%

Heavy duty (H)

twenty-four

two hundred and forty

four hundred and fifty

one hundred and twenty

-25 ~ +25

Normal type (M)

eighteen

one hundred and eighty

four hundred

one hundred

-25 ~ +25

Lightweight (L)

fifteen

one hundred and fifty

three hundred and fifty

two hundred

-25 ~ +25